Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: testing SPLF

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2009
    Location
    Nijeveen
    Posts
    236

    Default testing SPLF

    Hi,

    Testing of SPLF.
    3 new computers installed vdf 19.1 eval lic, copy the workspace to all PCs and run the application on all computers.
    Application and SQL works.


    Disable all firewall options. Remove the applications in WAS and remove sites in Inetmgr on all PCs.


    Add on PC 1 application in WAS as Load Balancing Master Node.
    Add application on PC 2 in WAS as Load Balancing Slave Node.
    On Pc 3 equal to 2
    On PC 2 and 3 configuration server options, this machine can act as a slave node and add TCP / IP port and IP address of pc1.
    The problem is that PC 2 works, but PC 3 does not, so on PC 1 I only see the slave node processes from PC 2 and not from PC 3.
    If power off PC 2, the web application will also be stopped.
    How can I test what goes wrong on PC 3.

    Wim

  2. #2
    Join Date
    Feb 2009
    Location
    Adelaide, South Australia
    Posts
    2,863

    Default Re: testing SPLF

    Hi Wim
    Start with checking the windows event logs.
    Cheers
    Marco
    Marco Kuipers
    DataFlex Consultant
    28 IT Pty Ltd - DataFlex Specialist Consultancy
    DataFlex Channel Partner for Australia and Pacific region
    Adelaide, South Australia
    www.28it.com.au

  3. #3
    Join Date
    Jan 2009
    Location
    Richmond, VA
    Posts
    5,854

    Default Re: testing SPLF

    Wim,

    As Marco mentioned, check the Windows event logs on both PC 3 and PC 1 for an indication of what is happening. Once we see what the errors are we can dig deeper.
    Best regards,

    -SWM-

  4. #4
    Join Date
    Mar 2009
    Location
    Nijeveen
    Posts
    236

    Default Re: testing SPLF

    Marco/Stephen,

    Thanks the problem was the firewall configuration, looks the same but was different.
    Restart the computers after configuration.

    Wim

  5. #5
    Join Date
    Mar 2009
    Location
    Nijeveen
    Posts
    236

    Default Re: testing SPLF

    How to setup reports with SPLF, application cannot open pdf files if using more than one slave node server. (sometimes)

  6. #6
    Join Date
    Jul 2014
    Posts
    206

    Default Re: testing SPLF

    Quote Originally Posted by Wim Schimmel View Post
    How to setup reports with SPLF, application cannot open pdf files if using more than one slave node server. (sometimes)
    Also interested in the answer

  7. #7
    Join Date
    Feb 2009
    Location
    Hengelo, Netherlands
    Posts
    10,869

    Default Re: testing SPLF

    Wim,

    While I did not test this should work fine with DataFlex 19.1 and the new HTTP Handler for downloading files.
    Regards,
    Data Access Worldwide
    Vincent Oorsprong

  8. #8
    Join Date
    Oct 2017
    Location
    Belgium
    Posts
    245

    Default Re: testing SPLF

    Are you saving the pdf's to a shared folder or just in the Reports directory on the slave?
    It should work fine if you write/read them to/from a shared folder from both slaves.

  9. #9
    Join Date
    Feb 2009
    Location
    Maasland, The Netherlands
    Posts
    2,605

    Default Re: testing SPLF

    Hi Wim,

    I have running this in production with DF 19.0 and then you have to FTP the pdf file to the PC in the DMZ. With DF 19.1 the PDF is created on the PC in the DMZ and this works fine.
    Best regards,

    Peter van Mil
    Appvantage b.v.

  10. #10
    Join Date
    Mar 2009
    Location
    Nijeveen
    Posts
    236

    Default Re: testing SPLF

    Where can I find this information, the video Synergy 2019 about SPLF only APPHTML on this server.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •