PDA

View Full Version : Available new version 1.4



FRANCO
5-Mar-2008, 12:25 PM
hello
new full demo setup is available it include also a full english help
reference for all classes.
this address : www.e-volutionweb.com/public/CJ11.1.3FORVDF12.1.exe

Franco Spinella
DATAFLEX ITALIA

FRANCO
6-Mar-2008, 02:23 AM
I forget to say that I talkinkg about the classes library for Codejock
Component Suite 11.1.3 AND 11.2.2 . It is a new release 1.4that include also
full reference help html format

this library is also available at very special price as bundle with our
ActiveX component Visual Imaging activeX 4.7


Regards
Franco Spinella
DATAFLEX ITALIA
franco-s@dataflex.it

"FRANCO" <franco-s@dataflex.it> ha scritto nel messaggio
news:sbkifXufIHA.404@dacmail.dataaccess.com...
>
> hello
> new full demo setup is available it include also a full english help
> reference for all classes.
> this address : www.e-volutionweb.com/public/CJ11.1.3FORVDF12.1.exe
>
> Franco Spinella
> DATAFLEX ITALIA
>

Hans van de Laar
6-Mar-2008, 01:49 PM
Hi Franco,

It seems that the CJ 11.2.2 version controls aren't supplied in the
setup?
Executing Cjclassesdemowithv11.2.2.exe is giving 'ActiveX component may
not be properly installed or registerd'. The other example
(cjclassessforvdf.exe) is running without problems.

Regards,

Hans

FRANCO wrote:

>
> I forget to say that I talkinkg about the classes library for
> Codejock Component Suite 11.1.3 AND 11.2.2 . It is a new release
> 1.4that include also full reference help html format
>
> this library is also available at very special price as bundle with
> our ActiveX component Visual Imaging activeX 4.7
>
>
> Regards
> Franco Spinella
> DATAFLEX ITALIA
> franco-s@dataflex.it
>
> "FRANCO" <franco-s@dataflex.it> ha scritto nel messaggio
> news:sbkifXufIHA.404@dacmail.dataaccess.com...
> >
> > hello
> > new full demo setup is available it include also a full english
> > help reference for all classes. this address :
> > www.e-volutionweb.com/public/CJ11.1.3FORVDF12.1.exe
> >
> > Franco Spinella
> > DATAFLEX ITALIA
> >

FRANCO
11-Mar-2008, 05:11 AM
yes true, there are two programs to run one run with control 11.1.3 and
other one with 11.2.2.
If you don't have the latest suite control you can run the
cjclassessforvdf.exe, the setup install the full suite control activeX
11.1.3, if you have license release 11.2.2 you can run the other program. I
know most of developer don't have the release 11.1.3 that is used by
visulald DATAFLEX 12.1, since they purchase the controls after 12.1 was
released and at that time codejock controls have release 11.2.2. So little
bit of conflict, since you can use only one command bar control in one
program. VDF12.1 commandbar control use 11.1.3 and you cannot use also the
command bar 11.2.2.... very bored things!

The release versions of codejock will be solved with vdf14 I hope.

regards
Franco Spinella


"Hans van de Laar" <hvdlaar@conclusion.nl> ha scritto nel messaggio
news:xn0fndely503ox000@news.dataaccess.com...
> Hi Franco,
>
> It seems that the CJ 11.2.2 version controls aren't supplied in the
> setup?
> Executing Cjclassesdemowithv11.2.2.exe is giving 'ActiveX component may
> not be properly installed or registerd'. The other example
> (cjclassessforvdf.exe) is running without problems.
>
> Regards,
>
> Hans
>
> FRANCO wrote:
>
>>
>> I forget to say that I talkinkg about the classes library for
>> Codejock Component Suite 11.1.3 AND 11.2.2 . It is a new release
>> 1.4that include also full reference help html format
>>
>> this library is also available at very special price as bundle with
>> our ActiveX component Visual Imaging activeX 4.7
>>
>>
>> Regards
>> Franco Spinella
>> DATAFLEX ITALIA
>> franco-s@dataflex.it
>>
>> "FRANCO" <franco-s@dataflex.it> ha scritto nel messaggio
>> news:sbkifXufIHA.404@dacmail.dataaccess.com...
>> >
>> > hello
>> > new full demo setup is available it include also a full english
>> > help reference for all classes. this address :
>> > www.e-volutionweb.com/public/CJ11.1.3FORVDF12.1.exe
>> >
>> > Franco Spinella
>> > DATAFLEX ITALIA
>> >